
Add to Cart
Fat A 4000mAh ER18505 Cylindrical Lithium Battery Fit Water Metering Primary Cell Glass To Metal Seal
Nominal Capacity | 4000mAh |
Battery discharged at continuous current 2.0mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃ | |
Nominal Voltage | 3.6 V |
Maximum Continuous Current | 150mA |
Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃ | |
Maximum Pulse Discharge Current | 300mA |
Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃ | |
Storage Condition | Temperature ≤ 30℃ Humidity ≤ 75%RH |
Operating Temperature | -55℃ to +85℃ |
Battery Dimension | See drawing on pag |
Max Weight | 31.0g |
Self-discharge Rate | 2% |
Max self-discharged rate at ambient temperature 23±2℃ | |
Shelf Life | 10 years |
Ambient temperature 23±2℃ |
1. Battery Characteristic
Bobbin Benefits
Excellent safety record, high capacity
Typical Applications
Low power consumption & long shelf life equipment,
like calculator, industrial PC CMOS, memory support power, etc.
2. Lithium Thionyl Chloride (Li-SOCl2) battery has high energy density, and its nominal voltage is 3.6V. Bobbin structure is best suited for low current discharge and spiral structure is best suited for high current discharge.
Principle and Reactions:
The positive active material of Li-SOCl2 batteries is liquid Thionyl Chloride (SOCl2) and negative active material is Lithium (Li).
3. General Safety Instructions
4. APPLICATION
Medical Instruments, Cash Registers, Alarms and security wireless devices, Mobile asset tracking, Electronic Meters (Water, Gas, Electricity), Automotive telematics, Vehicle tracking device, ETC (Electronic Toll Collection System).
APPLICATION
Fully automatic cameras with flash and exposure meter, Lighting, Radios, Electronic locks, Medical equipment, Water, gas and electricity meters, Memory backup power sources.