Nominal Capacity	4000mAh
Battery discharged at continuous current 5mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃
Nominal Voltage	3.0 V
Maximum Continuous Current	1500mA
Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃
Maximum Pulse Discharge Current	3000mA
Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃
Storage Condition	Temperature ≤ 30℃ Humidity ≤ 75%RH
Operating Temperature	-40℃ to +60℃
Battery Dimension	See drawing on pag
Max Weight	32.0g
Self-discharge Rate	2%
Max self-discharged rate at ambient temperature 23±2℃
Shelf Life	10 years
Ambient temperature 23±2℃

1. Battery Characteristic

Nominal voltage up to 3.0 V

Energy density up to 450Wh/kg

-40°C to +70°C

Self discharge rate is less than 2% per year at room temperature
No passivation effect, instant install-and-use, maintenance free
Ultra thin

Battery of variable dimensions can be selected to fit in the customer’s design
Custom batteries and battery packs are also available

The structure of the battery offers greater safety to meet customer’s requirement for special applications

2. Main Applications

Wireless telecommunication devices

Cardiac pacemaker, respirator, oxygenator, inspection devices, monitoring devices, infusion pump, etc.

RFID products, road toll transponder, IC cards, etc.

3. Manufacturing Advantages

HCB can make good quality Soft Pack Li-MnO2 Battery with 9 years experience;
Soft cell structure of Li-MnO2 Battery is researched and developed by HCB firstly in China;
There are nearly 60 available models for Soft Pack Li-MnO2 Battery;
More 3 million soft pack Li-MnO2 are sold to the customers each year by HCB;
So many terminal customers make HCB experienced in both civil and industrial applications..

4. Use WARNING

5. FAQS of General Safety Instructions

Do not charge. When this battery is charged, gas is generated inside and raises internal pressure, resulting in fire, heat generation, leakage or bursting.
Do not dispose of in fire, disassemble or heat in any way. It will damage the insulation materials and the safety vent resulting in fire, heat generation, leakage or bursting.
Insert batteries properly. Keep polarities in the correct position aligning + and - correctly for ALL batteries to avoid leakage or bursting.
Do not short-circuit. If the + and - come into contact with metal objects, short circuiting occurs resulting in heat generation or bursting. When carrying or storing batteries, avoid direct contact with metal objects such as bracelets or key chains by putting them in a separate bag.

Non - Rechargeable Primary Battery Cell 3v Cp705050 For E - Call System NB IOT

Lithium Primary Battery