HCB Battery Co., Ltd
We Power Your Technology
Add to Cart
6.0V CR-P2 Primary Lithium MnO2 Battery 2CR123A 2CR17335 Lithium Manganese Dioxide Non-Rechargeable
| Nominal Capacity | 1500mAh |
| Battery discharged at continuous current 1mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃ | |
| Nominal Voltage | 6.0 V |
| Maximum Continuous Current | 1500mA |
| Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃ | |
| Maximum Pulse Discharge Current | 3000mA |
| Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃ | |
| Storage Condition | Temperature ≤ 30℃ Humidity ≤ 75%RH |
| Operating Temperature | -40℃ to +85℃ |
| Battery Dimension | See drawing on pag |
| Max Weight | 45.0g |
| Self-discharge Rate | 2% |
| Max self-discharged rate at ambient temperature 23±2℃ | |
| Shelf Life | 10 years |
| Ambient temperature 23±2℃ | |
1. Battery Characteristic
The rated voltage of each battery is 6.0V
The specific energy density of each battery is 200Wh/kg
We provide a wide operating temperature range, from -40℃ to +85℃
The battery self-discharge less than 2% per year at room temperature
High capacity, stable performance, without passivation
Hermetic welding sealing to reduce the leakage for extending the shelf life to more than 10 years
High safety performance, reliable and environmental friendly
2. Main Applications
Animal health monitoring system,forest fire alert, smart irrigation system, etc.
Cardiac pacemaker, respirator, oxygenator, inspection devices, monitoring devices, infusion pump, etc.
Life jacket, signal light, buoy, etc.
3. FAQS of General Safety Instructions
Keep battery out of the children. If swallowed, please contact a physician at once.
The batteries may be incinerated or mutilated if they are closed to the fire and it leads a possible burst or they may release the toxic materials.
The batteries can’t be short circuit. If positive and negative polarity of a battery is directly connected, this may cause a short circuit and this may lead to toxic materials or gas leakage and/or violent rupture.
The batteries can not be soldered directly. If they are directly soldered, it will cause short circuit and a gas and toxic material leakage or big rupture.
