
Add to Cart
6000mAh Soft Package Primary Lithium Manganese Dioxide Batteries CP1005050 Non-Rechargeable
Nominal Capacity | 6000mAh |
Battery discharged at continuous current 5mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃ | |
Nominal Voltage | 3.0 V |
Maximum Continuous Current | 2000mA |
Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃ | |
Maximum Pulse Discharge Current | 5000mA |
Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃ | |
Storage Condition | Temperature ≤ 30℃ |
Operating Temperature | -40℃ to +60℃ |
Battery Dimension | See drawing on pag |
Max Weight | 50.0g |
Self-discharge Rate | 2% |
Max self-discharged rate at ambient temperature 23±2℃ | |
Shelf Life | 10 years |
Ambient temperature 23±2℃ |
1. Battery Characteristic
High Voltage
• Nominal voltage up to 3.0 V
High Energy Density
• Energy density up to 450Wh/kg
Wide Operating Temperature Range
• -40°C to +70°C
Long Shelf Life
• Self discharge rate is less than 2% per
year at room temperature
• No passivation effect, instant
install-and-use, maintenance free
• Ultra thin
Variable Design
• Battery of variable dimensions can be selected to fit in the customer’s design
Custom batteries and battery packs are also available
2. Main Applications
Marine & Lifesaving
Life jacket, signal light, buoy, etc.
Oil & Gas
Well pressure meters, float meters, logging while drilling(LWD), measure while drilling(MWD), etc.
Military & Defence
Portable radio communications, night vision equipment & thermal images, torches & lamps, etc.
3. Manufacturing Advantages
4. Company Advantages
5. FAQS of General Safety Instructions
In order to store the battery, the environment should be dry enough.
We need to stop using the battery when the abnormal heat release or leakage occurs.
Keep battery out of the children. If swallowed, please contact a physician at once.
The batteries may be incinerated or mutilated if they are closed to the fire and it leads a possible burst or they may release the toxic materials.
If + and - polarity of battery is connected directly, it causes a short circuit and this may lead toxic gas and materials leakage or a big rupture.
The batteries can not be soldered directly. If they are directly soldered, it will cause short circuit and a gas and toxic material leakage or big rupture.